stabilized soil mixing station operations Troubleshooting

First, there will be failure of the gas source
This failure occurs mainly in air compressor and pressure reducing valves and piping and compressed air Wheel Loader component of these places and so on. Since the low pressure is not high, usually
Adjusting spring break and there will be ruptured diaphragm, this time we must Timely replacement. With a slow rise in pressure, under normal circumstances Are clogged filter to be cleaned so often.
Followed by the failure of the cylinder
Since the cylinder and the cylinder has a leak outside of the phenomenon, in general, Are due to the eccentric rod installation, lubricating oil supply shortage, seals and Sealing ring worn or damaged piston rod cylinder with bruises and other impurities and made Into. We should timely adjust the position of the center of the piston rod to concrete block making machine check the reliability, but also timely for cleaning.
There is a failure of the valve
Since the pilot solenoid valve, exhaust hole is easy particularly blocked, Sealed lead lax activity causing death card spool will be the circuit so Barrier. In this case, we should be promptly cleaned. Through the above description, we stabilized soil mixing station out of the failure to And the solution have a certain understanding. If you have any better suggestions and Comments please do not hesitate to contact us.