mixing plant operation method

1) Turn on the power, the display shows "P", KM1 ~ KM4 contacts simultaneously pull it.
2) Enter the mixing ratio, not a fixed value of "000" (should be less than the value set with the ratio of about 15 ~ 20kg, this is the gap, in order to beat the ingredients according to the actual results of correction. 3) with the ratio setting is correct,Concrete mixer button to start batching ingredients. 4) Ingredients completed, the material light only after the material according to the material buttons. 5) When the printer is in standby, the material is completed print the results of this ingredient (no printer or the printer is turned off skip this). 6) The batching program ends, the need to re-batching ingredients can then click the button, concrete mixing machine controller's automatic / manual button, automatic lights when in automatic mode, then simply press the discharge button.